![FORESPAR PERFORMANCE PRODUCTS Forespar SR 2 Jib Roller [210003] FORESPAR PERFORMANCE PRODUCTS Forespar SR 2 Jib Roller [210003]](https://cdn.shopify.com/s/files/1/0558/1566/7746/products/68385XL.jpg)
![FORESPAR PERFORMANCE PRODUCTS Forespar SR 2 Jib Roller [210003] FORESPAR PERFORMANCE PRODUCTS Forespar SR 2 Jib Roller [210003]](https://cdn.shopify.com/s/files/1/0558/1566/7746/products/68385XL.jpg)
SR-2 Jib Roller
The Forespar® SR-2 Jib Roller with fit shrouds from 3/16” thru 3/8” wire diameter.
Use the proper size pair of insert liners according to the table below:
- 3/8” wire – use no insert
- 5/16” wire – use #1 inserts
- 9/32” wire – use #2 inserts
- ¼” wire – use #3 inserts
- 7/32” wire – use #4 inserts
- 3/16” wire – use #5 inserts
The Jib Rollers may be placed just above or below the spreader tips; however, installation will be easier if located below the spreaders. In this instance, you can pre-assemble the parts while on deck and reduce the possibility of losing parts while hanging in a boatswain’s chair. Have a 3 inch piece of masking tape within handy reach (stick it to the shroud).
Select the proper inserts, place them into the two halves of a hub and fit them around the shroud. Use the tape to loosely hold these parts together. Note that the hubs have two clearance screw holes at one end. Match these with the smaller holes at the other end of the other half. It is important that the mating faces of the inserts are parallel with the faces of the hub halves. Install the four screws supplied, tightening only to the extent that you can still slide the hub assembly up the wire shroud. Now remove the tape.
Next, install the rollers. Note that one half of each roller has clearance holes for the two screws. Mate these halves that don’t have clearance holes. Run these screws tight. Now slide the Jib Roller to the desired position on the shroud and finish tightening the four hub screws until the hub interfaces are fully closed.
USD : 22.48
Items returned in the same as new condition within 14 days of the original shipment date will be eligible for a full refund or store credit.
Refunds will be
charged
according to the
original form of
payment used for
the purchase.
The customer is
responsible for
shipping charges
during the
return and
shipping/handling
charges of the
original
purchase are
non-refundable.
All discounted
items are final
purchases.
Please contact
us before
shipping.
HELP
Contact us if you have any further questions and/or concerns;
E-Mail:
[email protected]
Phone: +90 530 070 49 22
Free Shipping over $110
All orders are
shipped within a
maximum of one
week.
You can contact
[email protected]
or our customer
service for all
details.